ZDC-180TPSA
Specifications
Main Item | Unit | ZDC-180TPSA | |||
---|---|---|---|---|---|
Locking Unit | Locking force | ton | 180 | ||
Die platen dimension | mm | 740 x 740 | |||
Tie bar distance | mm | 480 x 480 | |||
Die height distance | mm | 200 ~ 550 | |||
Die stroke | mm | 340 | |||
Tie bar diameter | mm | Ø90 | |||
Die adjustment speed | mm/min | 109(50HZ) 132(60HZ) | |||
Ejecting unit | Ejecting force | ton | 10.5 | ||
Ejecting stroke | mm | 90 | |||
Core unit | Electromagnetic valve | PT | 3/8" x 1(set) | ||
Oil outlet | PT | 1/4" x 2 (sets) | |||
Electric system | Motor capacity voltage | KW | Pump 11.25 Die adjustment 0.375 | ||
Power source | V | 220/380/415 (50/60HZ) | |||
Capacity of power source | KVA | 18 | |||
Shot unit | Shot force | ton | 7.8~25.9 | ||
Max. shot speed(*) | M/Sec | 4.5(*6.0) | |||
Plunger stroke | mm | 365 | |||
Plunger tip penetration | mm | 150 | |||
Plunger tip diameter | mm | Min Ø45 | Med Ø50 | Max Ø60 |
|
Shot pressure | Kgf/cm2 | 494~1630 | 400~1320 | 277~917 | |
Casting area | cm2 | 365~110 | 450~136 | 648~196 | |
Net shot weight | Kgf | 0.91 | 1.12 | 1.61 | |
Cooling water system | Cooling water inlet pipe diameter | PT | 1" | ||
Die cooling water outlet pipe diameter (in & out) | PT | 1" x 1 (inlet) 2" x 1 (outlet) | |||
Number of die cooling water adjusting valve cooling water | PC | 7 (inlet) 8 (outlet) | |||
Die cooling water | Ltr/min | 25~45 | |||
Hydraulic system | Die & ejecting pressure | Kgf/cm2 | 140;160 | ||
Max. Intensified pressure of injection | Kgf/cm2 | 225~330 | |||
Cycling oil volume | Ltr | 350 | |||
Cooling water | Ltr/min | 30~40 (Water temp 25oC) | |||
Machine relation | Machine size (LxWxH) | mm | 4800x1800x2800 | ||
Machine weight | ton | 6 |